Thermocat
Reduce Your Fuel Bills......minimise your carbon footprint
High Performance hot water cylinder.
The Chelmer Dual Thermostore is an exceptionally energy-efficient, multi-input sealed storage cylinder. It provides virtually unlimited hot water for domestic use and underfloor heating systems and is designed to keep a condensing boiler in condensing mode - making the most efficient use of your chosen energy source.
- Helps you meet your SAP rating
- Keeps condensing boilers in condensing mode which prevents cycling
- Inputs solar power directly into your heating and hot water
Installer Benefits
- Sealed system with built in primary expansion vessel and safety valve
- Pre-fitted and wired control valves, stats and time clock
- Simple compression connections to boiler, underfloor heating and hot water
- Professional or owner-installation - detailed instructions and technical helpline
Customer Benefits
- Safe, temperature-controlled hot water - 50% more than old style cylinders
- High flow at mains pressure - no need for shower pumps
- Long life, low maintenance
- multiple fuel inputs
Features
Energy-Saving Features
- Provides a buffer so that low heat from underfloor heating zones reduces boiler cycling
- Large heat storage capacity provides hot water at mains pressure
- Sealed system contains boiler and underfloor heating circuits plus built-in expansion vessel and safety valves
- Fail-safe thermostatic mixing valve gives high volumes of safe, temperature-controlled hot water
- Direct boiler connection minimises recovery time
- Dual thermostat system maximises effiency: Upper (set to 70°C) responds to hot water demand
- Lower (set between 35-55°C) regulates and responds to underfloor heating
Energy Sources
The Chelmer Dual Thermostore can accept a wide range of primary and secondary heat sources including highly efficient condensing boilers and renewable energies such as solar collectors
- Oil
- Gas
- LPG
- Electric
- Wood burning stoves
- Kitchen ranges
- Solar
Models
| Capacity Litres | 160 | 200 | 280 |
| Typical Usage | 1 baths + 1 showers | 2 baths + 2 showers | 3 baths + 3 showers |
| Height mm | 1470 | 1800 | 2000 |
| Diameter mm | 530 | 530 | 600 |
| Install footprint | 700 x 580 | 700 x 580 | 800 x 650 |
| Nominal flow rate @51°C | 25 litres/min | 30 litres/min | 35 litres/min |
| Solar coil | N | Y | Y |
| Woodburner coil | N | N | N |